Adaptive Parts

Adaptive Parts

Complete your security system with suitable spare parts and accessories

TurnCAM® Keybox

The innovative TurnCAM® Switch box allows you to enable and disable the acoustic warning of the turn assistant for turn signals and door signals.

TurnCAM® Switchbox for activating and deactivating the acoustic warning of the turn assist. Ideal for Vitor signals and door signals. The system is simple and quick to configure and can be configured as follows:
When the Vitor signal is activated, an acoustic warning signal is released in case of hazard detection.
When the passenger doors are open (e.g., in public buses), the acoustic signal is deactivated even if the signal is set.
This additional option is particularly recommended for public transport buses and coaches that travel entirely in city traffic, intercity or tourist traffic. To ensure the quality of our products, TurnCAM® Switchbox also undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

TurnCAM® Camera Body for SK 1708M

Evrensel muhafaza, geniş çatılı yapıya sahip araçlara (yandan) monte için uygundur.

This camera cover is used to mount the TurnCAM® system camera SK 1708M. It is made of a highly durable ABS material specifically approved for use in vehicles. The elegant and compact design integrates seamlessly into the overall look of the vehicle. To ensure the quality of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

TurnCAM® Calibration Box

TurnCAM® kalibrasyon kutusu, tur asistanı sistemi için kurulumdan sonra kusursuz kalibrasyon sağlar.

Each turn assistant must be calibrated after installation to ensure the system functions correctly. With the help of the calibration box, the detection range is determined depending on the camera position and vehicle size. Vehicle-specific calibration can then be saved. The box is plugged into the TurnCAM® detection box via a serial cable and operated. To ensure the quality of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

TurnCAM® GPS Antennas

GPS antenna providing connectivity for enabling and disabling all TurnCAM® turning assistants.

Turn assist can be activated and deactivated via the TurnCAM® GPS antenna. This function is also used to turn the monitor display on and off. The system can be configured as follows:
Activated below 40 km/h
Deactivated above 50 km/h
This additional option is recommended for all vehicles that are active in mixed urban and rural operations, or that are mostly on rural roads and highways.

Magnetic Base

Magnetic base for RK 1106/1104/1116/1405/1404/1415

Magnetic base for RK 1106/1104/1116/1405/1404/1415

Camera Slot

It has a robust, paintable plastic housing for use as a rear and side camera. Camera mounting is very simple and quick.

The Plastic Camera Housing provides a robust enclosure for rear side cameras. This is a polishable, UV and weather-resistant plastic housing that guarantees a solid and secure connection outdoors. Installation is very simple and quick.
As a modern and innovative protection designed to facilitate installation and servicing, it offers very simple and quick installation. To ensure the quality of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

Camera Body DBC 2040XX

There is a universal, paintable plastic housing for indoor installation for all DBC 2040XX cameras. Installing the camera housing is very simple and quick.

The Plastic Camera Housing provides a robust enclosure for indoor installation of all DBC 2040XX cameras. The protective housing is a universal, painted, UV and weather-resistant plastic housing, guaranteeing a secure and stable connection indoors.
As a modern and innovative protection designed to facilitate installation and servicing, it offers very simple and quick setup. To ensure the quality of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

Camera Slot

It has a robust, paintable plastic housing for use as a rear and side camera. Camera mounting is very simple and quick.

The Plastic Camera Housing provides a robust enclosure for rear side cameras. This is a polishable, UV and weather-resistant plastic housing that guarantees a sturdy and secure hold outdoors. Installation is very simple and quick.
As a modern and innovative housing designed to facilitate installation and servicing, it offers very simple and quick installation. To ensure the quality of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

DIRECS Removable Hard Drive

The entire DIRECS family of recorders (for 2nd to 3rd generation) provides a mobile removable hard drive for local recording of video and audio data. It is suitable for linear recording.

The mobile DIRECS hard drive for local recording of video and audio data for the entire DIRECS family of recording devices (from generation 2 to generation 3). Suitable for linear recording.
The DIRECS hard drive provides significantly higher performance in terms of data carrier speed and capacity. The robust and compact housing protects against dirt and damage. To ensure the protection of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

DIRECS USB Evaluation Unit

DIRECS USB evaluation unit for connecting removable hard drives to a PC or laptop. Power supply included.

The DIRECS USB evaluation unit is for connecting removable hard drives to a PC or laptop. Power supply included. The robust and compact housing provides protection against dirt and damage. To ensure the quality of our products, this product undergoes a comprehensive and rigorous quality assurance process with very precise component testing at every key stage of production.

HF2 Retaining Flange

Stable retaining flange 120°

  • For mounting microphone heads

  • M10 threaded rubber-mounted banjo bolt

  • Material: Sheet steel

  • Color: Silver

  • Dimensions: Height 53 mm, Width 31 mm, Depth 50 mm

  • Weight: 47 g

BW2 Mounting Bracket

Mounting bracket for TF1 90°

  • Hole for M10 threaded throats

  • Two mounting holes Ø 4 mm

  • Material: Sheet steel

  • Color: Black

  • Dimensions: Height 44 mm, Width 18 mm, Depth 22 mm

  • Weight: 15 g

BP4 Bottom Plate

Flange

  • Thread M10

  • For gooseneck mounting with Ø 11 mm and Ø 15 mm

  • Ø 33 mm bolt circle 3 x 120° ± 1°, screw holes M5

  • Material: Copper

  • Color: Silver

  • Dimensions: height 17 mm, Ø 42 mm

  • Weight: 130 g

BP1 Ground Plate

Sturdy base plate for gooseneck mounting.

  • Thread M10

  • For gooseneck mounting with Ø 11 mm and Ø 15 mm

  • Ø 58 mm, bolt circle 3 x 120° ± 5°, hole Ø 6 mm

  • Optionally for mounting M14 thread Ø 18 mm (product on request)

  • Material: Aluminum

  • Color: Black

  • Dimensions: height 15 mm, Ø 80 mm

  • Weight: 270 g

BP3 Ground Plate

Sturdy base plate for gooseneck mounting.

  • Thread M10

  • For gooseneck mounting with Ø 11 mm and Ø 15 mm

  • Ø 48 mm bolt circle 3 x 120° ± 1°, hole Ø 5 mm

  • Optionally for mounting M14 thread Ø 18 mm (product on request)

  • Material: Bronze

  • Color: Black

  • Dimensions: height 25 mm, Ø 65 mm

  • Weight: 280 g

Monitor Holder VESA

TFT/LCD mounting, tilt and swivel capability, supports all VESA standards up to 100 x 100 mm, and is compatible with all monitors in the LCM 806, LCM 809, and LCM 1006 model series.

This monitor holder offers an optimal viewing position thanks to its 2 pivot points and the ability to rotate and tilt. The telescopic function allows you to adjust the viewing distance to the monitor according to your needs. It can rotate up to 180° left/right and tilt up to 30° (up/down). Tilt and rotation angles depend on the TFT/LCD size and mounting distance. The mount is suitable for all TFT monitors up to 76 cm (30″) in length and has VESA standardized 75 x 75 or 100 x 100 mm hole spacing.

  • Suitable for screen sizes from 8″ to 30″

  • Mounter design can be tilted and swiveled

  • VESA standard 75 x 75 mm / 100 x 100 mm

  • Tilt range (bottom) -15°

  • Tilt range (top) +15″

    Swivel range (left) 90°

  • Swivel range (right) 90°

  • Load capacity (max.) 15 kg

This monitor holder offers an optimal viewing position thanks to its 2 pivot points and the ability to rotate and tilt. The telescopic function allows you to adjust the viewing distance to the monitor according to your needs. It can rotate up to 180° left/right and tilt up to 30° (up/down). Tilt and rotation angles depend on the TFT/LCD size and mounting distance. The mount is suitable for all TFT monitors up to 76 cm (30″) in length and has VESA standardized 75 x 75 or 100 x 100 mm hole spacing.

  • Suitable for screen sizes from 8″ to 30″

  • Mounter design can be tilted and swiveled

  • VESA standard 75 x 75 mm / 100 x 100 mm

  • Tilt range (bottom) -15°

  • Tilt range (top) +15″

    Swivel range (left) 90°

  • Swivel range (right) 90°

  • Load capacity (max.) 15 kg

Scroll to Top